Suburban Homes Construction Project Quality Management Plan (QMP) Prepare a quality management plan using the elements described in the PMBOK 6e (Section 8.1.3.1) for the Suburban Homes Construction Project. Content

Suburban Homes Construction Project Quality Management Plan (QMP) Prepare a quality management plan using the elements described in the PMBOK 6e (Section 8.1.3.1) for the Suburban Homes Construction Project. Content ( ) Over the course the semester you’ve become familiar with the project and as part of the overall project management plan, a quality management plan is needed to communicate how quality will be met to the satisfaction of each stakeholder involved in a typical residential construction project. You should perform research on quality standards associated with residential construction to determine applicable standards.  At least four (4) quality objectives associated with the project should be defined. As part of the section on quality tools, include a separate appendix with at least three (3) quality tools that will be used as a part of the project.  These can be drawn from: 1) flow charts, 2) check sheets, 3) Pareto diagrams, 4) histograms, 5) control charts, 6) scatter diagrams, 7) affinity diagrams, 8) process decision programs charts, 9) interrelationship digraphs, 10) tree diagrams, 11) prioritization matrices, 12) activity network diagrams, 13) matrix diagrams, 14) inspections, and 15) statistical sampling. Last, about 1/3 of the plan should be devoted to major procedures relevant for the project for dealing with non-conformance, corrective actions procedures, and continuous improvement procedures. If information needed to complete a QMP is not explicitly stated in the scenario description or other project artifacts you’ve created or collected for this scenario in the past units, then develop (make-up) the information you need to complete the plan.  Use tables and illustrations as needed to convey information. The plan (excluding the separate appendix) should be approximately 4 to 5 pages. Managing Nonconformance & Corrective Actions procedures Processes to ensure Continuous Improvement   (part of Quality Assurance) Quality Control focuses on Project Deliverables. Quality control is a set of activities    designed to evaluate project deliverables. Quality control focuses on finding defects in deliverables and/or verifying    that requirements are being achieved. Actual value or range of values/criteria that must be achieved to meet quality standards /customer satisfaction. Describe tools & techniques that will be used to determine if the deliverable is in compliance with quality standards. I.e. what tests/measurements/analysis will be performed to verify the deliverable conforms to specifications? Quality Assurance focuses on Project Processes. Think of quality assurance as activities    that to prevent quality problems while developing project    deliverables. Quality assurance ensures    that your project processes are appropriate and consistently followed. (Activities you will use to avoid    the need for rework) (Audits, Process Reviews, etc.) Stakehlder’s standards /expectations for the QA process. are the good or best practices stakeholders expect to be installed for reducing costs and improving quality? Activity that will be performed to monitor if the QA process /procedure is being followed and complies with organizational expectations (good or best practices).

Need your ASSIGNMENT done? Use our paper writing service to score better and meet your deadline.


Click Here to Make an Order Click Here to Hire a Writer